Category Archives: Jewelry Polishing Cloth

10 Important Facts About Jewelry Cleaning

Jewelry Polishing ClothsJewelries do get scratched, tarnished, and lose their sparkle when in contact with contaminants such chemicals and objects. For that reason, it is important that they be kept clean. The following are top 10 important facts about Jewelry Cleaning:

1) Jewelries are antagonistic to Chlorine and Bleach

That’s because these substances can tarnish, wear off and diminish the sparkles that the Jewelries do have. It is therefore important to take off the Jewelries when handling these substances or when swimming.

2) Jewelries tarnish rapidly under High Humidity

Humid air contains plenty of dissolved carbon dioxide which is acidic and has corrosive effects on the Jewelries. For that reason, Jewelry cleaning and polishing are to be done more frequently under such circumstances.

3) Jewelries are best cleaned by Professional Cleaners

Professionals unlike amateurs do have all the requisite technical expertise as well as the tools-of-trade to perform the tasks of cleaning more effectively. They are thus more likely to deliver the desired results.

4) Stones must be secured on the Piece before the commencement of the Cleaning Exercise

This can be ascertained by wiggling each stone by use of fingers. It is a necessary requirement since poorly secured pieces are more likely to fall off or wear off altogether.

5) Ultrasonic do wear off Loose Stones

Ultrasonic devices are those tools that are used for cleaning the Jewelries by subjecting them to sounds which have frequencies greater than the human hearing range (above 18,000 Hz). These devices have ducts for collecting these stones, meaning that they are the best devices for cleaning old worn-out stones.

Metal Polishing Cloths - Cape Cod, 4 by 66) Jewelries should never be cleaned in Sinks

Sinks have perforations that drain water into the sewerage systems. Should the jewelries fall into these perforations, it may be impossible to recover them.

7) Old and Cracked Opal Stones should be Soaked in Baby Oil

This is a quick “Do-it-yourself” home remedy. By so doing, the cracks are effectively covered and made to appear to have faded away.

8) Tarnished Jewelries can be brightened by a mixture of Water and Baking Soda

To achieve this, a paste is made by mixing water with baking soda. A soft toothbrush is then used to clean the tarnished jewelry after which it is rinsed thoroughly.

9) Sterling Silver Dip is a very effective Anti-tarnish

The jewelry being brightened only needs to be dipped into the bottle and lowered into the cleaning bottle for duration of about 15 seconds, after which it is rinsed.

10) Most Jewelry Stores do clean Jewelries free-of-charge

In case one only needs to have the jewelries cleaned, it is advisable to seek the services of a professional jewelry store since in most cases, this task is usually carried out free-of-charge.

Check out Jewelry reviews world, which describes top jewelry for mom gifts.

Guide On How To Use A Jewelry Polishing Cloth For Gold

Connoisseurs Silver Jewelry Polishing Cloths 2PcsGold jewelry scratches quite easily because it is a soft metal. However, you can keep your investment in mint condition by wiping the surfaces with a polishing cloth.

A polishing cloth will only remove light scratches. Any jewelry that has deep scratches must be polished by a specialist.

Guide On How To Use A Jewelry Polishing Cloth

You must clean the jewelry thoroughly before you implement any polishing procedures. You can cleanse the surfaces with a soapy, damp cloth. After the metal completely dries, polish the jewelry by wiping it with the cloth. If a piece has gemstones, do not polish the gems because the cloth may cause physical damage.

When to Polish Gold Jewelry 

Since polishing is an abrasive task, you should not polish your jewelry every time you find a new scratch. If a piece of jewelry is polished more than twice a year, the surfaces will become dull. Any jewelry that is worn every day should be polished once every three years.

Buffing, however, can be done more often if the cloth is not abrasive. You can buff your jewelry every month or once every three months.

Cleaning The Polishing Cloth

Always read the package instructions or the product label because all polishing cloths have specific washing procedures. However, most cloths will not lose their polishing properties if they are washed in cool water with a gentle detergent.

Professional Advice

A good polishing cloth will not produce great results if you use a poor polishing compound. Jewelers rouge smooths or shines various metals, such as gold and silver.

Jewelers Rouge is highly recommended because it was developed by experts for precious metals. The product restores luster by giving the surfaces a reflective finish. Jewelers Rouge works best on soft metals; you must use another polishing compound on harder metals.

Duo of Sunshine Polishing Cloths for Sterling Silver, Gold, Brass and Copper Metal JewelryHow to Use a Polishing Compound

Polishing compounds have the same characteristics as fine to coarse sandpaper. Any jewelry piece that has been severely scratched should be sanded prior to polishing. When the depth of the scratch is minimal, apply a very coarse compound on the jewelry. At this point, you should gradually use compounds that are less coarse until you achieve your desired finish.

In most cases, you will not get a reflective finish after you apply one compound. For example, if an aluminum jewelry piece has a bit of oxidation, it should be polished with a White Rouge Polishing Compound.